Dual Output
Windows
Dual Output lets you stream a single broadcast in both Horizontal Output and Vertical Output at the same time. The two outputs can share scenes and sources, while source positions and sizes can be adjusted separately for each layout.
To use Dual Output, select PRISM Streaming in your stream settings, then connect and enable at least two channels. Assign at least one channel to Horizontal Output and at least one to Vertical Output.
Follow the steps below to set up Dual Output.
Set up Dual Output
Enable Dual Output and assign output orientations
Click Dual Output on the right sidebar.
In the PRISM Streaming dock, assign channels you want to stream in landscape format to Horizontal Output.
In the PRISM Streaming dock, assign channels you want to stream in portrait format to Vertical Output.
Each channel can have only one output orientation. You cannot change the orientation after streaming starts.

Arrange your layouts and start streaming
Check the Horizontal Output and Vertical Output previews.
Adjust each source's position, size, and crop to fit each output.
To change broadcast details such as Broadcast, Title, Category, Tags, or Description, click Controls > Manage Broadcast.
Once setup is complete, click Start Streaming to stream Horizontal Output and Vertical Output at the same time.
Monitor stream status
The Vertical Stats dock shows the FPS, encoding lag, network dropped frames, total data sent, and output bitrate for Vertical Output.
The status bar at the bottom shows the stream status of the main Horizontal Output.

If you close the Dual Output or Vertical Stats dock, select it from the Docks menu at the top to reopen it. Closing or reopening a dock does not change whether Dual Output is enabled.

Common issues
1. PRISM Streaming is not selected
If a message appears when you enable Dual Output stating that the current service is not PRISM Streaming:
Go to Settings > Stream > Service and select PRISM Streaming.

2. Only Vertical Output is configured
If you click Start Streaming with Dual Output enabled and see a message that streaming cannot start because channels are assigned only to Vertical Output:
Assign at least one channel to Horizontal Output. To stream only in Vertical Output, turn off Dual Output.

3. Only Horizontal Output is configured
If you click Start Streaming with Dual Output enabled and see a message that streaming cannot start because channels are assigned only to Horizontal Output:
Assign at least one channel to Vertical Output. To stream only in Horizontal Output, turn off Dual Output.

Last updated
Was this helpful?





